Terminal - Sanyo PLC-SU50 Owner's Manual

Part Names and Functions

Terminal

Do not press this button. This button is used for optional
accessories.
q
COMPUTER IN 1 DVI-I
Connect computer output (Digital/Analog DVI-I type) or Multi
Card Imager (optional) to this terminal. (p17)
w
SERVICE PORT
This jack is used to service this projector.
e
AUDIO IN
Connect the audio output from video equipment connected to
r or i to this jack. (When the audio output is monaural,
connect it to L (MONO) jack.) (p17, 18)
r
VIDEO
Connect the composite video output from video equipment to
VIDEO jack. (p18)
t
USB (Series B)
When operating the connected computer with the remote
control, connect USB port of your computer to this connector
with a USB cable.
* A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the
RESET button with a pen, which will shut down and restart the unit. Do
not use the RESET function excessively.
10
q
COMPUTER IN 1
DVI - I
*
COMPUTER IN 2 /
MCI
COMPONENT IN /
MONITOR OUT
(p17)
w e r
AUDIO IN
R L VIDEO USB
(MONO)
S-VIDEO
SERVICE PORT
COMPUTER /
COMPONENT
RESET
AUDIO IN
AUDIO OUT
(VARIABLE)
u i
y
AUDIO IN COMPUTER / COMPONENT
Connect the audio output (stereo) from a computer or video
equipment connected to q or u to this jack. (p17, 18)
u
COMPUTER IN 2 /COMPONENT IN / MONITOR OUT
This terminal is switchable and can be used as computer input ,
component input, RGB Scart 21-Pin Video input, or monitor
output. Set the terminal up as either Computer input or
Monitor output properly before using this terminal. An optional
cable is required when using this terminal as component input
or RGB Scart 21-Pin Video input. (p17, 18)
(This terminal outputs analog signal from COMPUTER IN 1 DVI-I
terminal only when using as Monitor out.)
i
S-VIDEO
Connect the S-VIDEO output from video equipment to this jack.
(p18)
o
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack. (p17, 18)
This terminal outputs sound from AUDIO IN terminal (
t y
o
e y
or ).