Table of Contents
Advertisement
Operation Guide
Important Note:
1.During all the above three method,camera is in charging.
2.When camera can not be powered on,pls charge the camera.
3.If your computer can not recognize the camera after 30
seconds.Pls reboot your computer and using a card reader to
format the micro sd card and try it again.
4.It is recommended that you can copy the video clips to your
computer to get a smooth playback.
5.If you want to use the camera as a pc camera,pls download
Ecap driver from internet to run it on Win 7 above.
2.Manually recording
Power on the camera:
Hold on the power button for 2 seconds,the camera
will get into standby mode.
Indicator Status:The blue indicator will be on.
Manually Record:
Short press on the top record button,the camera will
start to record videos with 10 minutes clip each.The
camera will automatically detect the environment and
switch itself to day or night vision recording.
Indicator Status: The blue indicator flash 3 times and
goes off.Then the camera start to record manually.
8
Advertisement
Table of Contents
