JMC T12 User Manual page 14

Operation Guide
Important Note:
1.If you didn't find the SETTIMETXT file when you open the
micro sd card from your computer,Pls record a video clip
using the camera to activate the card and then try to set
the date and time again.
2.The amended date and time will not change unless the
battery is running out for long time.
3.When your camera is malfunction or wrong operation,pls
using a toothpick to hold on the reset hole to reset the
camera.
4.When you find your camera power off automatically,
there're two reasons for that:
1)The power is too low,you need to recharge the camera.
2)In standby status without any operation for 1 minute.
14