Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for JMC T12
-
Page 1: User Manual
WORLD'S FIRST Starlight mini camera MODEL NO: T12 USER MANUAL Please ensure that you read the complete user manual carefully before using any part of the product. - Keep this copy safe for future reference in case of operational difficulties. -
Page 2: Safety Instructions
Safety Instructions Please read the following instructions before using the camera: - Ensure that the camera is tested for the first time use and confirm that it suits the intended purpose. - We are not responsible for any missing video information due to wrong operation,Micro-SD malfunctioning or camera angle limit etc. -
Page 3: Product Accessories
Camera bracket 1 bracket 2 MINI SECURITY CAMERA MODEL NO: T12 USER MANUAL Please ensure that you read the complete user manual carefully before using any part of the product. - Keep this copy safe for future reference in case of operational difficulties. -
Page 4: Product Structure
Product structure Lens Power on button USB Port Mode（sound control/ motion detection) Micro-SD slot 5pcs invisible Led light Reset Micro phone Status indicator Record (video/photo /save) - Page 5 How to insert and take out Micro-SD card Insert Micro-SD card Take Micro-SD out Important notice: - The camera has the ability to record video only when Micro-SD is inserted. - Please avoid by all means to insert or remove Micro-SD when the camera is either powered ON or connected to the computer.
- Page 6 Operation Guide 1.Charge Pls charge the camera before your first time use. Recommended charging time is 1-2 hours for a fully charged. A)You can charge the camera by connecting it with a PC usb port or a usb 5v1A charge adaptor.Pls make sure the camera is power off for charging.
- Page 7 Operation Guide B)When you power on the camera and connect it to your pc usb port,this means that your camera is in Mass storage mode and PC camera mode. Indicator Status:Yellow and blue indicator are always on and red indicator flash slowly. Yellow Blue C)When you connect the camera to your usb charge...
-
Page 8: Manually Recording
Operation Guide Important Note: 1.During all the above three method,camera is in charging. 2.When camera can not be powered on,pls charge the camera. 3.If your computer can not recognize the camera after 30 seconds.Pls reboot your computer and using a card reader to format the micro sd card and try it again. - Page 9 Operation Guide indicator Saving videos: Short press the top record button again to save the video.Afterwards,the camera will be back to standby mode. Indicator Status: The blue indicator is on. Important Note: -.When the camera is in recording,powwer and mode buttons are both no effective.Pls short press the top record button back to standby mode and then continue to operate the camera.
- Page 10 Operation Guide 2)Start recording: When the environmental sound volume is over 60dB (normal speak volume),the camera will automatically start to record;The recording file will be saved and get into the next sound activated recording standby status when the evironment becomes silent after 2 minutes. Every 2 minutes,the camera will automatically detect the environment and switch itself into night vision,day time or recording,standby status.
-
Page 11: Motion Detection Recording
Operation Guide 3)Exit from sound activated recording mode: Short press the top record button or mode button while it is in recording.The camera will save the video and get back to the standby status.(Blue indicator is on) Blue indicator 4.Motion detection recording 1)Switch to motion detection recording mode: When the camera is in standby status(blue indicator is on).Hold on mode button for 2 seconds,the camera... - Page 12 Operation Guide 2)Start recording: When a subject is moving in front of the camera lens, it will detect and start to record automatically.If there's no more motion in 2 minutes,the video will be save and the camera turn itself into the next motion detection standby status.Every 2 minutes,the camera will automatically detect the environment and switch itself into night vision,day time or recording,standby status.
- Page 13 Operation Guide 5.time modification It will automatically create a time file named as SETTIME document after the camera is switched on. The time will be amended to the current time when you open the document and save it. Exit the portable disk and restart the camera and record, new recording videos will automatically synchronize with the current time.
- Page 14 Operation Guide Important Note: 1.If you didn't find the SETTIMETXT file when you open the micro sd card from your computer,Pls record a video clip using the camera to activate the card and then try to set the date and time again. 2.The amended date and time will not change unless the battery is running out for long time.
-
Page 15: Detailed Parameters
Detailed parameters Item Parameter Video Format Video compression M-JPEG Windows media player or others Playback software on PC windows xp/Vistar/7; Mac os OS supported 10.4 or above Color-pinhole Camera Lens Focal distance 2.8mm Memory extension supported Up to 32G USB port USB2.0 940nm, 5 pcs only LED TYPE... - Page 16 Indicator Status and their meanings Blue light always on Starting up with SD card Blue light flashes 10 seconds Starting up without SD card and shut down Light off Record mode Red light always on Sound control stand-by Light off Sound control recording Green light always on Motion detection stand-by...