Troubleshooting; Copy Problems - Epson Stylus SX110 Series User Manual

Troubleshooting

Error Indicators
Lights Cause Solution
Prepare a new ink cartridge.
If the light is still on or flashing after you replace the cartridge, try the procedure on the right.
Other lights off Sleep mode
Press any button except the
Turn off
Turn off
All lights flashing Turn off the printer. Open the scanner unit and remove the paper. Then turn the printer back on. If the error does not clear, contact your dealer.
Contact your dealer to replace it.
Other lights on Waste ink pad in the printer is saturated.
& See Loading Paper on the front page.
& See Replacing Ink Cartridges on the front page.
button to wake the product.
& If the paper is not ejected, try the procedures below.

Copy Problems

Enlarge Close the document cover tightly when you copy.
1. Nozzle Check
Good printout
Turn off
Problem with printout
& Run a nozzle check
2. Print Head Cleaning
Banding
Faint
B is off, Press for three seconds
Colors missing
soft, dry cloth
Hold down the y button and then press the P button
Try 1. Nozzle Check
Flashing Wait On
Copyright © 2009 Seiko Epson Corporation. All rights reserved.