Subscribe to Our Youtube Channel
Related Manuals for HBX SNO-0550
Summary of Contents for HBX SNO-0550
- Page 1 Installation Manual Snow Melt Unit 0550 Version 2.02 SNO-0550 HBX Control Systems Inc.
-
Page 2: Table Of Contents
WiFi Settings....................13 WiFi System Setup..................14-17 TMX-0100 Installation Procedure............. 14 Connecting to a Wireless Network............15-16 Adding the SNO-0550 to the HBX App........... 17 HBX App Functionality................18 Sample Wiring and Diagrams ............... 19-20 Troubleshooting Guide ................21-23 Warranty Information ................24... -
Page 3: Introduction
QR CODE Each SNO-0550 is labeled with a QR code, which when scanned will link to a digital version of this manual. If this manual is ever lost or damaged, simply scan this with a compatible device to download the latest manual version. -
Page 4: Description
The SNO-0550 can also be controlled remotely using your smartphone or tablet device with the free HBX Zone App. The HBX Zone App allows you to control your snow melt system with the ability to set snow fall rates, adjust/ monitor targets, set slab demands , and the ability to turn on/off your snow melt system anytime, anywhere. - Page 5 Front View Rear View Top View 66 mm 70.19 mm (2.60 in) (2.76 in) 188 mm 167 mm (7.40 in) (6.57 in) Bottom View 121 mm 100 mm (4.76 in) (3.94 in) © HBX Control Systems Inc. 2017 Page 3...
-
Page 6: Technical Data And Dimensions
H B X S N O - 0 5 5 0 S n o w M e l t C o n t r o l V e r s i o n 2 . 0 2 TECHNICAL DATA AND DIMENSIONS Specifications: TMX-0100 TECHNICAL DATA 1 x 5VDC input... -
Page 7: Wiring & Installation
Mounting Holes • Identify the four mounting holes on the SNO-0550, mark on the wall the desired location of mounting. • Predrill, anchor and fasten four screws for mounting. -
Page 8: Programming Sno-0550
H B X S N O - 0 5 5 0 S n o w M e l t C o n t r o l V e r s i o n 2 . 0 2 NAVIGATING THE SNO-0550 Relays: All programming steps within the SNO-0550 240VAC 5A Max STATUS are achieved by using the three buttons (and... -
Page 9: Status & Mode Descriptions
CONTROL SETUP Multicolour backlit Display Relays: 240VAC 5A Max STATUS The Multicolour Backlit Display is one of the key features Input: of the HBX Controls stand-alone SNO-0550 Control. TARGET 120VAC 15A Max SLAB °F °F SNO-0550 Depending on which mode of operation is selected the SUPPLY °F... -
Page 10: Status Screen
°F °F Supply Tank Target RETURN °F SNOW OUTDOOR °F NONE SYS P FL UP FL DN SNO-0550 Central Processing Unit SNO-0550 Central Processing Unit DO NOT DO NOT CONNECT 24 VAC MAX CONNECT POWER POWER HERE HERE 12 13... -
Page 11: Snow Rate Settings
MODERATE SNOW RATE SETUP ° Heavy 1) SNOW RATE SNOW RATE SETUP This will set the control to trigger MELT mode when Heavy snowfall is detected. ° 1) SNOW RATE HEAVY HEAVY © HBX Control Systems Inc. 2017 Page 9... -
Page 12: Design Temperature Settings
°F DESIGN TEMPERATURES 50°F 2) MIN SYSTEM 0°F 5) CWSD This is used to set the temperature in which the SNO-0550 will go into WWSD. If the 25°F 1) DELTA T 120°F 3) MAX SYSTEM 6) °C OR °F °F DESIGN TEMPERATURES outdoor temperature rises above this temperature, the control will turn OFF. -
Page 13: Slab Settings
3) MELT TIME 4) SENSOR LOC (INT or REM) Default: INT Holding the ▲ and ▼ buttons on the main screen simultaneously for 10 seconds will put the control into a forced melt demand. © HBX Control Systems Inc. 2017 Page 11... -
Page 14: System Settings
H B X S N O - 0 5 5 0 S n o w M e l t C o n t r o l V e r s i o n 2 . 0 2 4) SYSTEM SETTINGS System Setup SETUP MENU This setting is used to configure the demand type and mixing settings. -
Page 15: Testing Settings
5) RELAY 3 6) RELAY 4 6) WIFI SETTINGS WiFi Settings SETUP MENU This setting gives the user the capability to use the SNO-0550 remotely with the HBX 1) SNOW RATE SETUP App. 2) DESIGN TEMPS SETUP MENU SETUP MENU... -
Page 16: Wifi System Setup
TMX-0100 (ThermoLinx™ Wi-Fi Module) Installation Procedure The TMX-0100 is designed to be used with the ZON-0550, SNO-0550, and HBX Zone App for remote access. The operational status of the TMX-0100 is indicated by lights (LEDs). The TMX-0100 has three (3) lights on the front (red for Wi-Fi, green for ready, blue for Server). -
Page 17: Connecting To A Wireless Network
8. Once connected check the red, green, and blue LED lights on the TMX-0100. All LED lights should be steady. 9. Now you are ready to add the SNO-0550. See Adding the SNO-0550 on page 17. © HBX Control Systems Inc. 2017... - Page 18 6. Once connected, check the red, green, and blue LED lights on the TMX- 0100. All LED lights should be steady (allow for a couple of minutes). 7. Now you are ready to add the SNO-0550. See Adding the SNO-0550 on page 17.
-
Page 19: Adding The Sno-0550 To The Hbx App
SNOW-0000 1. On the home screen, select “Add device”. CHANGE PASSWORD 2. Enter the Sync-Code for the SNO-0550. The Sync- Code can be found in the System Setup Menu in option 6) 1) NO 2) YES WIFI on the SNO-0550. -
Page 20: Hbx App Functionality
This allows you to toggle the control into Melt Mode, or turn Melt Mode off. 4. Advanced Settings Allows you to have access to all the settings on the SNO-0550 control including snow rate setup, Design temperatures, Slab and System setup. -
Page 21: Sample Wiring And Diagrams
WIRING DIAGRAMS 1) Snow Melt with Injection Mixing and WiFi Connection SNO-0550 Central Processing Unit DO NOT DO NOT CONNECT 24 VAC MAX CONNECT POWER POWER HERE HERE 12 13 PW TM TM TM *Note: TMX-0100 is only applicable when using Wi-Fi... - Page 22 3) Snow Melt with Floating Action Valve Mixing SNO-0550 Central Processing Unit DO NOT DO NOT CONNECT 24 VAC MAX CONNECT POWER POWER HERE HERE 12 13 PW TM TM TM System Pump System Sensor Return Sensor Optical Sensor Boiler...
-
Page 23: Troubleshooting Guide
Display button is stuck Switching Display Screen is Flickering • Up/down/enter button is stuck Control does not power up • Check power supply (120V) Damaged PCB. Resolution: contact HBX Technical Support. • © HBX Control Systems Inc. 2017 Page 21... - Page 24 No communication between modules • CAB-0150 connector is not connected properly to the control • Disconnect the Thermolinx module and power down the SNO-0550 control. Power it up and reconnect the Thermolinx module. If issue persists contact HBX tech support Page 22...
- Page 25 SNO-0110 Sensor for signs of damage or improper drainage. Reset control when issue has been corrected to eliminate error code. For additional assistance with the SNO-0550, please contact our Technical Support Department toll free at: +1 (855) 410-2341 ©...
-
Page 26: Warranty Information
Limitation of Liability In no event will HBX be liable for any damages, including loss of data, loss of profits, costs of cover or other incidental, consequential or indirect damages arising out of the installation, maintenance, commissioning, performance, failure or interruption of an HBX product, however caused and on any theory of liability. - Page 27 H B X S N O - 0 5 5 0 S n o w M e l t C o n t r o l V e r s i o n 2 . 0 2 NOTES: © HBX Control Systems Inc. 2017 Page 25...
- Page 28 Phone: +1 (403) 720-0029 Fax: +1 (403) 720-0054 Email: inf o @ hbxcontrols.com Web: www.hbxcontrols.com Toll Free Technical Support: +1 (855) 410 2341 HBX Control Systems Inc. 4516 - 112 Avenue SE © HBX Control Systems Inc. 2017 Calgary, AB Canada T2C 2K2...
Need help?
Do you have a question about the SNO-0550 and is the answer not in the manual?
Questions and answers