Figure 12 - High Availability Configuration
The gateway supports two ways to obtain Backup SIP proxy address:
IP address
Domain name
Configuring the IP Address of SIP Servers:
Note: the IP address of the primary SIP server is configured on the top half of the SIP page.
Here are the steps to configure the IP addresses of the backup SIP proxy:
Step1
Ensure that active-standby feature is enabled.
Fill primary SIP server IP address in Registrar server, and then submit.
Step2
Step3
Click Add and fill the IP addresses for the standby SIP servers in Backup SIP proxy.
2.3.7.2 Configuring Active-Standby
Enter the SIP trunk setting page, and click Basic > SIP > High availability configuration and
choose Active-standby, then submit.
NetGen Communications, Inc.
Basic Configuration
Page 19