Procedures To Factory Restore Your Aurender - Aurender W20 Quick Start Manual

Procedures To Factory Restore Your Aurender

1. Make sure the unit is plugged in and the rear panel power switch is in the
off position.
2. While pressing the front panel power button, switch on the back panel
power switch.
3. Once the unit's display shows the Aurender logo, release the front panel
power button.
4. Wait for the recovery process to finish. Once the recovery is complete, the unit
will reboot.
Please note: After a factory reset recovery your system operating system may need
to be updated. Additionally, if using a NAS, it will need to be remounted
and you will need to run the AMM (Aurender Music Manager) to restore
the erased metadata.
- 14 -