Eaton Halo Home HWB1BLE40AWH Quick Start Manual

Quick Start Guide
Smart Internet Access Bridge
HWB1BLE40AWH
• Control your lights from anywhere in the world.
• Light must be installed and paired before starting.
What does the Bridge do?
The Bridge creates a secure private connection between your
local HALO Home network and the HALO Home cloud service
through your Wi-Fi router. With the Bridge you will be able to
control and manage your HALO Home devices from anywhere
using your mobile device or web browser, as well as control
your lights using Amazon Alexa.
Before Bridge Setup
Download the HALO Home app and claim at least one installed and powered HALO Home
light fixture before installing the Bridge.
1

Bridge Setup

1. Make sure the Bridge is within 5 to 40 feet from the Wi-Fi router you want to connect it to, and no more than 70 feet
from the nearest HALO Home device.
2. Plug the Internet Access Bridge into a 100-240V socket.
3. Wait at least 2 minutes for the Bridge to initialize. You will be ready to continue once the Blue and Green indicator
lights are blinking.
Note: Sometimes it may help to move a HALO Home device closer to the Bridge and the Bridge closer to the Wi-Fi router
for setup.

What do the lights mean?

Flashing Green Your bridge is not connected to your Wi-Fi network.
Flashing Blue Your bridge is not claimed to your HALO Home account.
Solid Your bridge is connected to your Wi-Fi networks.
Green
Solid Your bridge is connected to your HALO Home account.
Blue
5 - 40 up to 70
feet feet
100-240V compatible
Manual reset
Bluetooth and Wi-Fi
indicator lights
www.eaton.com/HaloHome
21