As shown in Figure
pin that is not bent in the emergency hold of the CD-RIM drive drawer. Then,
push the CD-RIOM drive drawer and remove it as shown in Figure
Remove the computer cover as described in [Cover Open] on Page 64. Remove
four screws from the hard case, and lift the hard case as shown in the figure.
Insert the additional hard case in the separated hard disk case as shown in the
figure.
, open the CD-RI-ROM drive by inserting a thin and solid
.
Turn off the system and
disconnect the cable
before disassembling the
product. Otherwise, an
electric shock may occur.
Correctly connect the signal
cable and the power cable.
Otherwise, malfunctioning,
product damage, or an elec-
tric shock may occur.
System Expansion
75