3-7. Setting the Power Saver Mode
Regardless of BIOS setup, you can use the Power Saver mode in Windows as fol-
lows.
Select [Start]
Double-click the Power option icon on the Control Panel window.
After setting Power Scheme items in the Power Schemes tab, click the [OK]
button.
Press the advanced tab and set options appropriately. Then, click the [OK] button.
54
System setup
[Control Panel]
[Switch to Classic View].
TWhen the device connected to
the computer does not support
Power Saver functions, the
Standby mode or Hibernate
mode may not be properly func-
tion.
In this case, deactivate Power
Saver feature.
Note
Hibernate Mode :The current
work states are saved intact on the
H/D before the power goes off.
The states will be recovered as
they were when the power is on
later.