Planar Simplicity Series User Manual page 30

4. Select Connection Type to configure your IP settings. Press save when complete.
5. When finished, select Enable to complete setup. Press the Return key on the remote
control if enabling the network connection is not desired.
Signage Display Settings
6. Use one of the following setup options:
a. Import Signage Settings from SD.
i. Use settings previously saved to an SD card using the Export Signage
Display Settings in the Android OSD
settings except for the Signage Display Name field.
b. Import Signage Display Settings from USB
i. Use settings previously saved to a USB storage device using the Export
Signage Display Settings in the Android OSD
import all settings except for the Signage Display Name field.
c. Manual Setup
i. Signage Display Name
Simplicity Series 4K Displays User Guide
020-1343-00A
1. Assign a name to the display. By default, this is "PD_" plus the
MAC address of the display.
Operating the Display
(see page 56). This will import all
(see page 56). This will
Page | 30