Sanyo LCD-19E30A Owner's Manual page 26

MENU OPERATION (TV/AV mode)
MTS ( analog TV only)
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1
Press MENU
"SOUND" menu then press
2
to "Auto" or "Mono".
3
Mono mode
If you experience noise or poor reception of any stereo/bilingual
program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
• If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to Auto,
A/B
then switch to Mono (monaural).
Dual 1 or Dual 2 mode ( analog TV only)
You can hear only Dual 1 or Dual 2 sound selected, whenever
bilingual programs are received.
1
"SOUND" menu then press
2
to "Dual 1" or "Dual 2".
3
Mono mode
If you experience noise or poor reception of any stereo/bilingual
program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
• When the MTS setting is in Mono mode, the "Dual" is not
selectable.
• The "Dual" setting status remains even if the TV is turned off.
26
.
.
SCREEN MENU
ATV Menu...〔AUDIO〕
MTS
Dual
Selectable Sound
Auto
Bass Boost
Virtal Surround
Confirm Return Navigate
OK MENU
ATV Menu...〔AUDIO... MTS 〕
MTS
Dual
Selectable Sound
Auto
Bass Boost
Virtal Surround
Confirm Return Navigate
OK MENU
AV Menu...〔AUDIO... Dual 〕
MTS
Dual
Selectable Sound
Dual 1
Bass Boost
Virtal Surround
Confirm Return Navigate
OK MENU
Cancel
BACK
Cancel
BACK
Cancel
BACK