Pc Connections; Pc Menu Operation - Sanyo DP50749 Owner's Manual

PC CONNECTIONS AND SETUP
Note: Before connecting any cables, disconnect the
AC power cords of both the HDTV and PC from the
AC outlets.
Note: Power on the HDTV and any other peripheral
equipment before powering on the computer.
To avoid an "Out of Range" condition please set
your PC's output resolution to one compatible with
your HDTV. See page 3.
NOTE:If computer has only DVI Output, a DVI to RGB
converter will be required (not included.)
RGB OUTPUT
JACK
Stereo mini
audio cable
RGB Monitor
cable
HDTV BACK
PC Picture
Standard – Sets predetermined values to the
Picture parameters.
Manual – Adjust the screen's Contrast, Brightness
and Color Temperature settings.
PC PICTURE (MANUAL) SCREEN
Note: These settings do not affect normal TV viewing.
DVI OUTPUT
JACK
PC OR LAPTOP
Sanyo recommends using
a monitor cable that in-
cludes a Ferrite Core.
Need help?
PC Setting
Auto Adjustment – Automatically adjust display
position, dot clock and phase.
Dot Clock – Adjust the Dot frequency to match
your computer's Dot frequency.
Phase – Adjust this parameter when the picture
appears to flicker or is blurred.
H-Position – Move the image horizontally
V-Position – Move the image vertically
Power Saving – Enable the HDTV to turn to
Standby Mode when computer is not in use.
PC SETTING SCREEN
PC Sound
Standard – Sets predetermined values to the
Sound parameters.
Manual – Adjust the HDTV's Bass and Treble
settings.
PC SOUND (MANUAL) SCREEN
Note: These settings do not affect normal TV viewing.
www.sanyoctv.com
7
1-800-877-5032