Thank you for purchasing this Rockville Flip Down Roof Mounted High Resolution Digital Monitor with DVD Player and Multimedia input. We are very proud to bring you what we consider to be the absolute best value in mobile audio products. This project has been a culmi- nation of years of devel opment involving a team of dreamers, engi- neers, designers and marketing gurus.
Precautions • To minimize the risk of improper installation Rockville recommends that the installation of this product be performed by an MECP-Certified professional installer. • Improper installation may cause damage to the vehicle or injury to the driver and occupants.
Powering the Unit • Turn the engine key to the “ACC” or “ON” position • Press and hold the power button for 3 seconds • The unit will turn on. • When the engine key is turned to the “OFF” position, the unit will turn off. Tip: If the unit does not turn on, check to ensure all wires are connected properly.
Control Panel ATTENTION Be sure to insert disc label side up! Previous/Rewind Skip to previous chapter, song, picture, page, or video. Next/Fast Forward Skip to next chapter, song, picture, page, or video. Turn door lamps ON/OFF. Door Lamp Press to turn-on the unit. Power ON/OFF Acces and adjust unit settings.
Remote Control Functions Use letter keys to operate game functions. Game Start Start game. No function. Title Select game menu items. Select Press to eject disc. Eject Press button to open DVD menu. PBC Menu Display Displays disc information. Turn unit on and off. Power Press to confirm settings.
Getting Started • Insert the DVD, label side up, into the disc drive. • Wait for the DVD to load. • Unit will automatically begin playback. If disc was previously inserted, the unit will resume playing from where the DVD was stopped. Control •...
Page 9
Advanced Functions • Press button to enter sub menus. Press buttons to scroll through sub menu options. • Press buttons to adjust settings. • Press OK to confirm selection. • Press the SET UP button to return to settings selection. Press again to exit menu mode. Game Mode •...
Interchangeable Covers Chassis Cover 1. Remove the unit from vehicle roof and place on a flat surface. Remove the chassis cover using the included removal tool. Insert the tool into the slot found to the left and right of the AV outputs on the rear of the unit to release the cover.
Page 11
Interchangeable Covers Screen Cover 1. Remove the unit from vehicle roof and place on a flat surface. Remove the screen cover using the included removal tool. Open the screen to approximately a 45 degree angle. Insert the tool into the groove found along the top edge of the screen to remove the cover.
5. Attach the unit to the metal mounting plate using the screws removed in step 2. • Connection may vary depending on vehicle make and model. Rockville recom- mends that the installation of this product be performed by an MECP-Certi- fied professional installer.
Troubleshooting No display Check for loose or disconnected cables. Check input mode settings on the on-screen menu. Check ground cable. Make sure the area it is attached to has no rust or corrosion and is clean. Make sure ground connection is very tight and secure. Check for loose or disconnected cables.
Page 16
Visit us at: RockvilleAudio.com Due to constant improvements, these specifications are subject to change without notice. Copyright 2018...
Need help?
Do you have a question about the RVD14BGB and is the answer not in the manual?
Questions and answers