jobmate JM850AG Safety And Operating Manual
  1. Manuals
  2. Brands
  3. jobmate Manuals
  4. Grinder
  5. JM850AG
  6. Safety and operating manual

jobmate JM850AG Safety And Operating Manual

850w/100mm
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SAFETY AND OPERATING MANUAL
850W/100mm
ANGLE GRINDER
JM850AG

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JM850AG and is the answer not in the manual?

Questions and answers

Related Manuals for jobmate JM850AG

Summary of Contents for jobmate JM850AG

  • Page 1 SAFETY AND OPERATING MANUAL 850W/100mm ANGLE GRINDER JM850AG...

  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL (RCD) protected supply. Use of an RCD reduces the risk of electric shock. SAFETY WARNINGS 3. PERSONAL SAFETY WARNING! Read all safety warnings and all a) Stay alert, watch what you are doing and instructions. Failure to follow the warnings use common sense when operating a power and instructions may result in electric shock, fire tool.

  • Page 3: Safety Instructions For All Operations

    before making any adjustments, changing designed and recommended by the tool accessories, or storing power tools. Such manufacturer. Just because the accessory can be preventive safety measures reduce the risk of attached to your power tool, it does not assure safe starting the power tool accidentally.

  • Page 4: Safety Warnings Specific For Grinding And Abrasive Cutting-Off Operations

    may make exposed metal parts of the power tool “live” a) Maintain a firm grip on the power tool and position and could give the operator an electric shock. your body and arm to allow you to resist kickback k) Position the cord clear of the spinning accessory. forces.
  • Page 5 SYMBOLS f) Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not To reduce the risk of injury, user must suitable for the higher speed of a smaller tool and may read instruction manual burst.

  • Page 6: Component List

    COMPONENT LIST 1. Auxiliary Handle 2. Spindle Lock Button 3. On-Off Switch 4. Hand Grip Area 5. Inner Flange 6. Outer Flange 7. Spanner 8. Grinding Disc* 9. Clamping Screw 10. Protection Guard For Grinding 11. Coded Projection 12. Protection Guard For Cutting* *Not all the accessories illustrated or described are included in standard delivery.

  • Page 7: Technical Data

    ACCESSORIES Auxiliary handle Spanner Wheel guard for cutting (not supplied, available for helpline) We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. TECHNICAL DATA Rated voltage 230-240 V ~ 50 Hz...
  • Page 8 OPERATION INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for cutting, roughing and brushing metal and stone materials without using water. For cutting metal, a special protection guard for cutting (accessory) must Fig.A be used.
  • Page 9 Fig.C2 flange is fitted facing towards the disc to provide improved support for the disc hole (See Fig. C.1). Always ensure your disc is securely clamped. Adjusting the protection guard Before any work on the machine itself, pull the mains plug. For work with grinding or cutting discs, the protection guard must be mounted.

  • Page 10: Working Hints For Your Angle Grinder

    MAINTENANCE 3. CUTTING WARNING! For cutting metal, always work with Remove the plug from the socket before carrying the wheel guard for cutting. out any adjustment, servicing or maintenance. When cutting, do not press, tilt or oscillate the Your power tool requires no additional lubrication or machine.

Table of Contents