Contemporary Controls EISX8M series Installation Manual

EISX8M Se
Industrial Ethernet 10/100
EISX8M extended-tempera
beyond both Plug and Play
conventional PnP features
or full-duplex operation, flow
such as RapidRing™, VLAN
Mirroring, Simple Network M
programmable fault relay.
Each switch provides pream
compensation — retiming s
compensates for inherent s
verifying that a working ada
Configuration can be done
to communicate on the sam
192.168.92.68, or b) via a c
terminal emulation program
All ports support PAUSE flo
for half-duplex. All RJ-45 p
The switches are powered f
and redundant power conne
They come with the hardwa
front panels feature a powe
LEDs for the link status, act
Designed for Industrial Ethe
complies with EMC immunit
standards for industrial env
eries
0 Mbps Compact Managed Swit
I nstallation Guide
ture managed switches provide c
(PnP) and configurable switches
(auto-negotiation, 10/100 Mbps
w control), the EISX8M adds adv
N, Trunking, Quality of Service (Q
Management Protocol (SNMP), a
mble regeneration with symmetry
signals to eliminate jitter. Digital p
ignal strength roll-off. Link integr
apter or hub is on the distant end
in two ways: a) via a web browse
me LAN as the EISX default IP ad
console port connected to a Wind
m (for console settings, see page
ow control for full-duplex links and
orts feature Auto-MDIX for ease
from wide-range, low-voltage AC
ections are provided for backup c
are for either DIN-rail or panel mo
er LED, a management status LE
tivity, and data rate of each port.
ernet applications, each switch
ty and emissions compatibility
ironments.
tching Hubs
capabilities
s. Besides
s data rate, half-
vanced features
QoS), Port
and a
y and amplitude
pre-emphasis
rity is monitored,
of a segment.
er from a PC set
ddress of
dows-based
3).
d backpressure
of cabling.
C or DC sources
considerations.
ounting. The
D and bi-colour