Using The Remote Control - Sanyo DP23845 Owner's Manual

Œ
Input Key—Press to select the program
source to watch: TV signal or signal from a
DVD Player or other equipment you have
connected to the AV jacks.

Number Keys—Two keys must be pressed
to select a channel. Example : Press 0 then 6
to select channel 6. For cable channels 100
through 125, press and hold the 1 key until
C1– – appears. Then press the other two
numbers.
Ž
Caption Key—(See page 17 .)

Menu Key—Use this key with the Cursor
LM and – + keys (see
adjust features of the on-screen menu
system (see pages 14 ~ 16).

Channel Scanning (CH LM) and Volume
(VOL – +) Keys—Press to scan through the
channels in memory and to adjust the
volume.
‘
Mute Key—Press once to minimize the
volume. Press again to restore.
Note: When using the audio out jacks, this
key will not mute the sound.
’
V-Guide Key—(See page 18 ~ 20.)
“
Power Key—Press to turn TV on or off.
I Be sure batteries are installed correctly.
I Point the remote control toward the TV. Objects between
the remote control may cause misoperation of the
remote control function.
12
Need help?
Visit our Web site at

USING THE REMOTE CONTROL


) to navigate and
www.sanyoctv.com
Points toward TV
Œ

Ž


‘
’
I Cannot select channel with number keys. Press "0" in
front of numbers 1~9. Example: Channel 05.
1-800-877-5032
or Call
“
”
•
11
12
13