Advertisement
Products" must be read and understood. (This instruction manual is
available along with other technical papers at
3. The structure of the mating surface MUST be capable of supporting the
combined weight of the SB-82 brackets, the OPALine-82 loudspeakers and
all associated rigging. The mounting surface must satisfy the required
safety factors specified by local and national codes, as well as safe rigging
practices. The SB-82 weighs 0.2kg (0.44 lb.). The OPALine-82 enclosure
weighs 2.8kg (6.2 lb.). A maximum of two (2) OPALine-82 enclosures may
be suspended from an SB-82 bracket. If two enclosures are used the weight
of the TBEC coupling bracket must also be added. The TBEC-82 weighs
0.2kg (0.44 lb.)
4. The SB-82 bracket should be installed only by someone experienced in the
overhead suspension of items. They should be familiar with applicable
local/national codes governing the installation of these types of products
and those governing the attachment of these types of products to specific
structures.
CAUTION: The SB-82 bracket and OPALine-82 enclosure are designed for INDOOR
use and installation ONLY! DO NOT INSTALL IN OUTDOOR
The SB-82 consists of a single part and is shown in Figure 1 below.
The first step is to mount the SB-82 brackets to the top section of the OPALine-82, or
the top section of the TOP OPALine-82 if two OPALine-82 enclosures (and a TBEC-82)
INSTALLATION
Figure 1
www.onesystems.com)
ENVIRONMENTS!
3
Advertisement
