Remote Control Function - Sanyo DVD-DX517 Instruction Manual

Sanyo dvd player instruction manual
Table of Contents

Advertisement

Remote control Function

STANDBY/ON
Press to switch on the unit. Press it again to put the unit in standby mode.
N/P
Press repeatedly to select a TV type, NTSC, PAL or MULTI.
OPEN/CLOSE
Press to open /close the disc tray.
The digit keys can be used to input numbers or make selection of a track or a
chapter, etc.
Press to enter an item in the menu or to confirm and execute a selection.
È · È Ï
ENTER
ENTER
The direction keys can be used to move the highlight in the menu.
SETUP
Press to enter/exit the setup menu.
During playback, press to enter the GOTO menu. In the menu, use the
GOTO
direction key [UP]/[DOWN] to select a setting item and press [ENTER] to enter
the editing state, then with the digit keys input a specific track, disc time, track
time, chapter, title, chapter time or title time to go to directly. Press it again to
exit the GOTO menu.
PROG
Press this button to enter/exit the program menu with which you can playback
the contents of a disc in your desired order.
In the program menu, use the direction keys and digit keys to make a program
list, then move the highlight on START and press [ENTER] to start program
playback.
During program playback, press [PROG] to enter the program menu. Now,
STOP is highlighted. Press [ENTER] to cancel the current program playback.
Press to start a playback or resume the normal playback from the fast forward,
fast reverse, frame-by-frame, slow-motion playback, etc.
Press to temporarily pause a playback. Press it again to resume the playback.
Press for fast forward playback. The available speeds are 2X, 4X, 8X, 16X and
32X.
Fast reverse playback. The available speeds are 2X, 4X, 8X, 16X and 32X.
Press to return to the previous chapter/track.
Press to skip to the next chapter/track.
Press it once to pre-stop a playback. Press [
the pre-stopped status. Press it twice to stop a playback and the disc will be
reset to the starting point.
STEP
Press repeatedly to advance the video frame by frame. Press [
normal playback. (Note: Applies to DVD,
] to resume the playback from
VCD discs, etc
-8-
] to resume the
.)

Advertisement

Table of Contents
loading

Table of Contents