Other Cautions - Sanyo Xacti VPC-WH1EX Instruction Manual

k Storing and maintaining your camera
i Do not leave the camera unwashed after it has been
immersed in salt water or if salt water is adhering to
it. Doing so may cause corrosion and discoloration of
the plating, as well as deterioration of the camera's
waterproof capability.
i After the camera has been used in water, use fresh
water to wash it. Never use soap or detergent to
clean the camera, as doing so will cause deterioration
of the camera's waterproof capability.
i After washing the camera, take care to completely
drain it, and use a dry cloth to wipe off any drops of
water adhering to it (page 70).
i Do not leave the camera in an environment colder than
0 °C (32°F) or warmer than 40 °C (104°F), as doing so
may cause deterioration of the camera's waterproof
capability.
i Waterproof seals are used in this camera. It is
recommended that the waterproof seals be replaced
every year with new ones. For replacing the seals,
please consult your dealer.
* Please note that there is a fee for replacing the
waterproof seal.
k Other cautions
i Do not subject the camera to severe jolts, as doing so may deform the
battery cover, card slot cover, DC IN terminal cover, or the camera body,
thus compromising its waterproof capability. If the camera has been
subjected to a strong jolt, please consult with your dealer.
HINT
What is "JIS IPX8" (formerly "JIS protection grade 8")?
i "JIS IPX8" specifies that a device is protected against the effects of
continuous immersion in water.
xxiii
English
NOTE