Advertisement
Quick Links
Installation Instructions
Model MKB-5/-5C
Annunciator/Keypad Module
The Model MKB-5/-5C Annunciator from Siemens
Industry, Inc., communicates with the MMB Main
Control Board through the System network link. The
MKB-5/-5C provides the MXL with its primary control
and annunciation.
OPERATION
The MKB-5/-5C has a multi-line display that continu-
ously updates information about the system event
status. If there are multiple events (alarms, security
conditions, supervisories and/or troubles), the highest
priority event that occurred displays on the screen. The
user can view up to 8 events at a time and can scroll
through the complete list using the Up (
(
) keys located next to the More Info key. For further
information on the operation of the MXL Multi-Line
Keyboard/Display Panel, refer to the MXL Keyboard/
Display Panel Operating Instructions, P/N 315-048692,
and Section 3, OPERATION, in the MXL/MXLV
Manual, P/N 315-092036.
The keyboard/display panel has keys for the following
functions:
• Acknowledging fire alarms (ALARM ACK)
• Silencing audibles (AUD SIL)
• Acknowledging supervisories (SUPV ACK)
• Acknowledging troubles (TRBL ACK)
• Acknowledging security conditions (SEC ACK)
There is also a separate key for resetting the Control
Panel (RESET).
The 10-digit numeric keypad allows entry of the three
levels of user passwords. It is also used to perform
specific menu-driven operations as well as pro-
gramming and maintenance functions.
Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
P/N 315-048727-5
Separate UP and DOWN keys located next to the
MORE INFO key allow the user to scroll forward and
backwards through the entire list of events.
The SPACE key allows the user to input addresses
faster by enabling them to reduce redundant key
presses of the "0" key.
The MORE INFO key allows the user to instantly view
all relevant information about the highlighted event,
which is displayed in the last three lines of the screen.
The user can access the MXL Control menu by
pressing the ENTER key.
The panel has System status indicator LEDs. The
ALARM and TROUBLE LEDs function even if the
) and Down
main processor fails. (See Figure 1).
POWER
PARTIAL SYSTEM
DISABLED
ALARM
ACK
1
GHI
4
PQRS
7
*
AUD
SUPV
TRBL
SEC
RESET
SIL
ACK
ACK
ACK
ABC
DEF
F1
HELP
2
3
ALT
1
JKL
MNO
PRINT
F2
5
6
TUV
WXYZ
SPACE
F3
8
9
ALT
2
ENTER
CLEAR
#
0
F4
Figure 1
MKB-5/-5C Panel
Siemens Building Technologies, Ltd.
Fire Safety & Security Products
2 Kenview Boulevard
Brampton, Ontario
L6T 5E4 Canada
MORE
INFO
ALT 1
ALT 2
FUNCTION
FUNCTION
FUNCTION
Advertisement
Related Manuals for Siemens MKB-5
Summary of Contents for Siemens MKB-5
- Page 1 MORE INFO key allow the user to scroll forward and Control Board through the System network link. The backwards through the entire list of events. MKB-5/-5C provides the MXL with its primary control The SPACE key allows the user to input addresses and annunciation.
- Page 2 315-092098 and P/N 315-092099, respectively). To install the TMM-1 module when using an MMB-3, it is necessary to first remove the ANN-3 board on the back of the MKB-5. After the TMM-1 is mounted, the ANN-3 can then be replaced. Setting the Network Address...
- Page 3 CCU/M or RDM-1 PORT C J4 on the back of the MKB-5/-5C to P6 on the MMB, or to P7 or P10 on the MOM, or to P3 or P4 on the OMM. Make sure that the red tracing wire is at position 1 on both connectors.
- Page 4 Notes: Use a minimum wire gauge of 22 AWG. Use a maximum of 80 ohms per pair of wires for the network connections. Use shielded twisted pair for network connections. Terminate the shield ONLY at the MMB enclosure. For Style 7, use a 120 Ohm, 1/4W, 5% EOLR, P/N 140- 820150, in positions 1 and 2 and positions 3 and 4 on plug J8.