Setup Menu - Sanyo VPC-T1060 Instruction Manual

Setup Menu

Set your camera's operating environment.
1. Set the button to [
2. Press the
the button.
3. Select the desired option item with the
press the button to enter its respective menu.
4. Select the desired setting with the
the button.
5. To exit from the menu, press the
Beep
This sets whether or not to mute the camera sound each time you
press the camera's buttons.
* On / Off
Fr. No. Reset
This creates a new folder. The captured images are recorded
to the newly created folder from number 0001.
* Cancel / Execute
Auto Off
If no operation is performed for a specific period of time, the
power to the camera is automatically turned off. This feature is
useful for reducing battery usage.
* 1 Min. / 2 Min. / 3 Min. / Off
Date/Time
Refer to section in this manual titled "Setting the Date and
Time" (page 17) for further details.
Sys. Reset
This returns all basic settings to the camera's default settings. The
time setting will not be reset.
* Cancel / Execute
Language
Refer to section in this manual titled "Choosing the Language"
(page 18) for further details.
Format
Refer to section in this manual titled "Formatting the Memory Card or Internal Memory" (page
18) for further details.
Media Info.
This displays the free capacity of the internal memory or the memory card.
System Info.
This displays the firmware version of the camera.
Video Output
This sets your camera to match the system of the equipment that you are going to connect to the camera.
* PAL / NTSC
] or [ ]; or press the [
P
button, and select the [Setup] menu with
/
] button.
/ buttons, and
buttons, and press
button.
EN-37