Capture Mode; Capturing Images - Sanyo VPC-T1060 Instruction Manual

CAPTURE MODE

Capturing Images

Your camera is equipped with a 2.8" full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the button to turn the power on.
The status LED lights green and the camera is initiated.
If the power is turned on in [
is ready for shooting. In both modes, if the camera mode is changed to [
lens barrel will retract into the camera body after 30 seconds.
2. Set the button to [
3. Compose your image in the LCD monitor.
Turn the zoom lever to
subject on the LCD monitor.
Turn the zoom lever to
wider angle image.
4. Press the shutter button.
Pressing the shutter button down halfway
automatically
exposure, and pressing the shutter button
down fully captures the images.
The focus area frame turns green when the
camera is in focus and the exposure is
calculated.
When the focus or exposure is not suitable,
the frame of the focus area turns red.
] or [
P
].
P
side to zoom in on the subject, and enlarges the
side to zoom out on the subject, and provides a
focuses and adjusts
] mode, the lens will extend forward and it
b
the
], the
a
EN-19