Getting Started
Now that you are familiar with the layout of your camera, you are ready to start
taking photos and movies.
Taking your First Photo
Taking a photo with the camera is very simple.
Turn the camera on and press the SCENE button to access the Auto
1. Frame the shot on the LCD screen and press the Shutter button halfway. The
camera automatically adjusts the focus and exposure. The focus bracket turns
green when ready.
2. Press fully and hold the Shutter button to capture the image.
When a camera steady warning icon
sible, as a longer exposure time (more than 1/30 second) is required.
Anti-Shake Function
This function is available in Auto
mode. Press the OK button to enable the Anti-
Shake function, and press again to disable it. An
Anti-Shake icon
when the function is activated.
Using Macro Mode
Macro mode is designed for close-up photography and can capture all detail even
when your subject is very close to the camera. Press the Left/Macro
tion button. The Macro icon
Setting the Flash Mode
You can choose from four flash modes to suit various lighting conditions.
Press the Up/Flash/Delete
modes on the LCD screen. The flash setting remains the same for subsequent pho-
tos until you change it as described above.
Auto flash: The flash fires automatically when needed.
Flash off: The flash is turned off.
Fill flash: The flash always fires.
appears, hold the camera as still as pos-
capture
displays on the LCD screen
displays on the LCD screen.
navigation button to scroll through the four
Getting Started 17
mode.
naviga-
Taking your First Photo