Table of Contents
Advertisement
SETTING THE DATE AND TIME
NOTE
œ If the date and time are not set, November 1, 2002 midnight is recorded as
the date and time. Consequently, "2002/11/01 00:00" appears during
playback.
œ Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for approx. 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps 1 and 2).
To correct the date and time settings.
œ After steps 1 and 2, press [l] on the arrow button to select the line of the
setting that you want to change, and press [c] to select that setting. Then
press [j] or [l] to set the new setting.
161
English
Advertisement
Table of Contents
