Warnings; Parts; Instructions For Use; Assembling And Dismantling The Co-Sleeping Cot - JANE BABYSIDE Use And Assembly Instructions

"BABYSIDE" CO-SLEEPING COT
IMPORTANT. KEEP FOR FUTURE REFERENCE.
READ CAREFULLY

WARNINGS

-The co-sleeping cot should always be placed on a horizontal floor.
-Do not let children play unsupervised near the co-sleeping cot.
-When the child is in the cot unsupervised, make sure that the rail is always up, correctly fastened and with the zips closed,
and that the wheels are completely locked.
-Do not use the co-sleeping cot if any of the parts are broken, damaged or missing.
-WARNING: This cot should no longer be used when the child can sit up, kneel up or stand up unaided.
-Make sure that all the assembly parts are correctly fitted as well as the locking devices.
-The thickness of the mattress should be such that the vertical height (distance from the top of the mattress to the top of
the sides) is, at least, 200 mm.
-If you purchase a mattress different to the one supplied, make sure that it is the right size.
-Be aware of the dangers caused by fire and other sources of heat, such as electric bar heaters, gas fires, etc...
-Keep the metal parts clean and dry to prevent them from rusting.
-To clean the plastic parts, just use mild detergent and warm water.

PARTS

A Set of structure and fabric cover
B Base frame
C Detachable lower bar
D Mattress
E Fastening straps
A1 Detachable bar
A2 Window zips
A3 Baby's window
A4 Height adjustment locking button
A5 Height selector dial
A6 Base frame locking button
A7 Clasp to secure the fastening straps to the main structure
A8 Wheels
A9 Wheel lock brake
A10 Retractable legs
B1 Supports for detachable bar (A1) in co-sleeping mode

INSTRUCTIONS FOR USE

Assembling and dismantling the co-sleeping cot

To assemble the co-sleeping cot, unfold the legs so they are vertical.
Then fasten the metal crossbar on the bottom part of the legs of the co-sleeping cot into the correct slots in the central
plastic part. The fastening clips should be facing the floor.
Slot both ends in gently separating the legs and press until you hear it click into place.
'click'
8