Co-Sleeping Mode - JANE BABYSIDE Use And Assembly Instructions

CO-SLEEPING MODE

To have your baby closer to you at night, it is possible to hook the cot to the parents' bed using the fastening straps.
You can have direct contact with your baby through the side window.
CO-SLEEPING MODE RECOMMENDATIONS AND WARNINGS
-The height of the parents' mattress should always be higher than the mattress of the co-sleeping cot.
-WARNING: Only use the cot with the detachable bar lowered when it is in co-sleeping mode.
-WARNING: Do not attach the cot to the foot of the bed in co-sleeping mode.
-WARNING: The cot must not be used in co-sleeping mode with round beds and/or mattresses, inflatable mattresses
or water beds.
It is only possible to use this mode if the adult bed used complies with the assembly specifications listed below.
1) Open the side of the co-sleeping cot with the window unfastening the zips fully.
2) Slide the button on one end of the detachable bar and partly remove it. Then do the same on the other end so
you can remove the detachable bar fully.
11