3.1.6 USB
MG2639_V3 module integrates the USB interface and conforms to USB1.1 interface specifications.
The module can connect the host through the interface and provide up to 12Mbps data rate. Users can
upgrade the software via the interface.
Classification
No.
45
USB
46
3.1.7 ADC
MG2639 module's 28
function.
Classification
No.
ADC
28
Note: the software doesn't support this interface by default, therefore it requires
customization.
3.1.8 PWM
Classification
No.
PWM
55
Note: the software doesn't support this interface by default, therefore it requires
customization.
3.1.9 LCD
MG2639 V3 module provides a serial LCD interface and supports the LCD device with serial
communication. It supports up to 480*320 resolutions.
This document is not allowed to
transmit without ZTE Corporation's
permission
Table 3-5 USB interface signal definitions
Definitions
I/O
USB_DM
I/O
USB_DP
I/O
th
pin can provide up to 98.1 KSPS sampling rate and 10BIT A/D conversion
Table 3-6 ADC interface signal definitions
Definitions
I/O
ADCIN
Input
Table 3-7 PWM interface signal definitions
Definitions
I/O
PWM
output
Table 3-8 LCD interface signal definitions
©ZTE CORPORATION All rights reserved
Description
USB data -
USB data +
Description
Analogue signal
input
Description
Pulse width
modulation
output
User Manual
Remarks
Remarks
0-2.8V
Remarks
2.8V IO
14