Connections - Sanyo VMC-8620 Instruction Manual

CONNECTIONS

Before making any connection, make sure all the devices are turned off.
Before making the connections, please refer to the instruction manual accompanying each device. If the devices are not connected
properly, that may cause a fire and/or damages.
Basic connections
Monitor
To Audio input
terminal
To Video
input terminal
To Audio input
terminal
To AUDIO A
INPUT terminal
To VIDEO A
INPUT terminal
Video camera Monitor
Note:
The components and connection cables are not included and must be purchased separately.
If connecting a single component, it can be connected to either the A or B terminals at the rear of the monitor.
Video recorder
To Video
input terminal
To AUDIO B
INPUT terminal
To VIDEO B
INPUT terminal
Video recorder
Connections to the S-VIDEO terminals
To AUDIO
input terminal
To AUDIO
input terminal
Video camera
5
: IN signal
: OUT signal
To S-VIDEO input terminal
(Rear panel)
To Y/C input terminal
Monitor
Video recorder