Advertisement
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go
back and fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Locate Spine (C) and set back face down on a scratch free surface as shown in detail #1.
3. Align the "U" shape plate holes of Top & Bottom Shelf Frame (A & B) with the threaded
inserts on the Spine (C) in place, attach with 3/4" Bolts (2) through Lock Washers & Flat
Washers (4 & 5) through the bracket holes. See detail #1.
Sketch
Description
Tools required
Please call for replacement parts or assistance:
VAS Furniture Mfg. Inc.
Assembly Instructions
Required Hardware In This Step
No.
3/4" Bolt
Qty.
2
Lock Washer
8pcs
Allen Wrench
1-866-942-5362
Factory No. 56-12089
Model # PRO44-1GB
4
5
Flat Washer
8pcs
8pcs
Page 5
Advertisement
