Advertisement
Model # PRO44-1GB
TIPPING RESTRAINT HARDWARE
Note: We have included one Tipping Restraint Hardware bag for this Unit.
When properly installed, this restraint can provide protection against the unexpected tipping
of the Unit due to small tremors, bumps or climbing. We strongly recommend mounting this
hardware to a wall stud and your Unit when installing.
Please carefully read the instructions printed on the white plastic bag.
Note: You must install the Tipping Restraint Hardware with the unit in use to prevent
any accidents or damage to the unit.
Tools Required: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill, and 3/8" Drill Bit.
Your assembly should now be complete.
Thank you for your purchase.
1-866-942-5362
Please call for replacement parts or assistance:
VAS Furniture Mfg. Inc.
Factory No. 56-12089
Page 14
Advertisement
