Using Dsp-Em - Dometic DSP-EM Installation And Operating Manual

Energy & lighting controls. monitoring and control device
Hide thumbs Also See for DSP-EM:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Using DSP-EM

8.1
Starting up the battery sensor
➤ Use the table to determine the necessary value for your battery type:
Value
Type of battery
0
Lead acid battery
1
Gel-battery
2
AGM-battery
3
eStore-battery
➤ Press the selector button.
➤ Turn the selector button until the determined value is displayed.
➤ Press the selector button to save the value.
✓ The display indicates "service code 13".
➤ Determine the capacity of your batteries (0 – 500 Ah).
➤ Press the selector button.
➤ Turn the selector button until the determined capacity is displayed.
➤ Press the selector button to save the value.
✓ DSP-EM switches off and can now be put into operation.
I
NOTE
Only for specialists
The advanced service settings can be found in the service guide at
dometic.com/manuals.
The advanced service settings must be performed by specially trained personnel. An
incorrect setting of the values can impair the functionality of the connected devices.
9
Using DSP-EM
9.1
Display
Item in
fig. 5,
Explanation
page 5
1
Menus
2
Status displays
3
Display of values
4
Display of values as a bar chart
12
DSP-EM
EN

Advertisement

Table of Contents
loading

Table of Contents