Adjusting The Phone's Volume Settings - Sanyo S1 User Manual

Adjusting the Phone's Volume Settings

Adjusting the Ringer Volume
1. Select > Settings > Sounds > Volume > Ringer.
2. Select a volume level and press
Tip:
You can adjust the ringer volume in standby mode (or the earpiece
volume during a call) by using
You can make the ringer vibrate at any volume level by checking the
Always Vibrate
box next to
Adjusting the Alert Volume
This setting controls the alert volume for 10-4, Voicemail,
Messaging, and Calendar/Alarm. You can set the alert volume
separately from the ringer volume setting.
1. Select > Settings > Sounds > Volume > Advanced Ring..
2. Select 10-4, Voicemail, Messaging, or Cal./Alarm.
3. Using the navigation key, select Separate Vol.
4. Select a volume level, and press
Adjusting the Phone's Receiver Volume
1. Select > Settings > Sounds > Volume > Receiver.
2. Select either Earpiece or Speaker.
3. Select a volume level, and press
Adjusting the Application, Start-up/Power-off, or Key Beep Volume
1. Select > Settings > Sounds > Volume.
2. Select Application, StartUp/PwOff, or Key Beep.
3. Select a volume level, and press
Done (left softkey).
.
.
Done (left softkey).
Done (left softkey).
Done
(left softkey).
27