Thermaltake CL-O016-PL00BL-A Installation Manual

A x 1 D x 1
Controller PWM Cable
Please turn off the power Please turn off the power
before installation. before installation.
2
Connect the PWM cable onto
the mainboard (4Pin PWM) and controller.
4
H
Parts List
E x 1
Mianboard Signal Mianboard Signal
Bridge Cable
(ASUS,MSI)
Installation Guide
D
D
M/B 4Pin PWM
H
Riing Plus RGB Controller
F x 1 G x 1
LED Signal
Bridge Cable
Bridge Cable
(GIGABYTE)
1
Connect the fan cable in numerical order onto
the controller. (Start from port 1)
3
If you want to use more than two controllers ,
please connect them with the bridge cables
H x 1
Bridge Cable
A
* Fan not included
3
Connect the power cable to
the SATA connector and controller.
I x 1
Velcro
1
2