Dialing From The Contacts List; Using Speed Dialing - Sanyo Katana II User Manual

Dialing From the Contacts List

To dial directly from a Contacts entry:
1.
Press > Contacts > Find/Add Entry.
From the standby mode, press Contacts (right softkey) to display
Shortcut:
the Contacts list.
2.
Highlight the entry you want to call and press
default phone number.
– or –
To dial another number from the entry, highlight the name and press
, and then highlight the number you wish to call and press

Using Speed Dialing

With this feature, you can dial your favorite entries using one keypress for
locations 2–9. (See "Assigning Speed Dial Numbers" on page 92.)
To use speed dial :
From standby mode, press and hold the appropriate key for
approximately two seconds. The display confirms that the number
has been dialed when it shows "Connecting...".
Speed dialing may not be available when you are roaming; when you
Note:
are roaming off the home network, you must always dial using 11 digits
(1 + area code + number).
to dial the entry's
Section 2A: Phone Basics
.
35