Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Aqua To Go AQUA Cold
Summary of Contents for Aqua To Go AQUA Cold
- Page 1 Page 1 of 12...
-
Page 2: Table Of Contents
A water safe area Lifting or carrying your water cooler Do not let your cooler run dry Pre rinse cleaning instructions Fitting the Aqua To Go Premium Spring Water Bottle LED Indicators – Power, Cooling Cold Temperature control Electrical connection... -
Page 3: Quick Start Summary
– see page 9. If everything is ok then ensure that the top cover is properly secured back on - place into the slots, hold the spike and gently twist clockwise. Any issues please contact Aqua To Go. 6. INSTALLING A BOTTLE Gently lower your AQUA TO GO water bottle onto the water intake spike. -
Page 4: Parts And Features
Note: Specifications and content of this manual are subject to update and change without notice. UPON RECEIVING YOUR COOLER Thank you for purchasing an AQUA TO GO water cooler. Your cooler has been inspected in accordance with our factory’s comprehensive Quality Assurance Checklist. Inspect your cooler and should you find any material defects or have any queries please read Trouble Shooting p.11 and contact our customer service... -
Page 5: Certification
On the rear of the unit there are three marking plates: a) Serial number plate - stating the model, service contact details, voltage, amperage. b) Warranty numbers - which enables AQUA TO GO to trace back the date of manufacture and also obtain other information regarding its production and sale. -
Page 6: Wiring Diagram
1. WATER INTAKE AND SPIKE 5. COLD WATER TAP (BLUE) 9. POWER SWITCH 2. POWER INDICATOR LIGHT 6. AMBIENT WATER TAP (GREY) 10. VENTILATION GRILL 3. COOLING INDICATOR LIGHT 7. REMOVABLE DRIP TRAY COVER 11. POWER CORD 4. COLD INDICATOR LIGHT 8. -
Page 7: A Water Safe Area
FITTING AN AQUA TO GO PREMIUM SPRING WATER BOTTLE Place your water cooler in an appropriate position. -
Page 8: Led Indicators - Power, Cooling Cold
Water temperature will depend upon usage, room temperature and when the thermo electric cooling system last activated. Accurate temperatures are measured from the water flow and not from within the container that the water is dispensed. Any queries please contact the AQUA TO GO Service Centre ph 1300 760 474 or service@aquatogo.com.au ELECTRICAL CONNECTION ... -
Page 9: Storing Your Water Cooler
TROUBLE SHOOTING GUIDE Many common water cooler problems are easily fixed. Please read the below and if you still have an issues please call AQUA TO GO ph 1300 760 474 or service@aquatogo.com.au PROBLEM POSSIBLE CAUSE Not plugged in or power switch off. - Page 10 A complete set of terms and conditions, and further care and maintenance information, can be viewed at www.aquatogo.com.au For any queries or concerns please contact the AQUA TO GO Service Centre. Please have ready at this time your cooler serial and batch number, which are the numbers located on the small warranty sticker on the rear of your cooler, and your proof of purchase receipt.
- Page 11 The owner has the obligation and responsibility to diagnose and/or make minor adjustments if specifically requested to do so by AQUA TO GO or its agent. Where deemed appropriate, parts may be sent to the owner for fitting by the owner. The owner agrees to reimburse the authorized service centre/agent for any repair not covered by the terms of this Limited Warranty.
- Page 12 Page 12 of 12...