iStarUSA T-5K25TU-SA User Manual

T-5K25TU-SA
User's Manual
T-5K25TU-SA Manual
Features:
Elegant plastic panel design
Fits in any 5.25" drive bay
Two USB3.0 ports
Unique screwless design for hot-swapping 2.5" SATA hard drive
Accommodates 12.7mm slim optical drive

Specifications:

Fits 2.5"Serial ATA hard disk
Supports hot swap
Supports SATA III(6.0Gb/s)
Housing Assembly: 138mm(L)x148mm(W)x42mm(H)
/ 5.43"x5.83"x1.65"
Interface: SATA/USB3.0
Weight: 484g/1.07 lb
Operating Temperature:

Package Content:

T-5K25TU-SA
SATA data cable
SATA+4PLED-MOLEX cable
User manual
Screws 3 x 6
Screws 2 x 3
Installation :
1 x 5.25" to Slim ODD plus USB3.0 x 2 & 1 x 2.5" HDD Hot-Swap Trayless Drive Cage
/ 32 F~131 F
1Pcs
1Pcs
1Pcs
1Pcs
4Pcs
2Pcs
Connection :
1. Insert the SATA 15P connector into
the T-5K25TU-SA 15P, connect
the big power 4P connector to the
PC 4P power plug, and the small
4P LED wire connector to the 4P LED
port at the back of T-5K25TU-SA.
2. Insert one end of the SATA data
cable to T-5K25TU-SA, another
end(7P) to either the mother board
or the SATA RAID card.
3.
4. Plug USB3.0 cable connector
motherboard.If your motherboard does
not support USB3.0 then you
can use the alternate USB3.0
connector instead for USB3.0
operation only.
Place T-5K25TU-SA into an available
5.25" bay in the chassis and secure
with screws.