6
Use 2 Light-Block Sheets (provided with projector) corresponding with lens. (Refer to the Type No.
below.) Set 2 Light-Block Sheets through the lens.
Make sure the shape of Light-Block Sheets and be sure to set them as shown in the Fig. 6.
NOTE:
●
Be sure to set each Light-Block Sheets as shown in Fig-6.
●
Make sure the mark (TOP and BACK) on Light-Block Sheets and set them properly.
Use light-block sheets Type No.
TYPE FC1 (PART No. 610 284 2500)
TYPE FC2 (PART No. 610 284 2494)
LIGHT BLOCK SHEETS
Make sure the sheets figure and
put on proper position.
-8-
Fig-6