Sanyo LNS-S03 Replacement /Installation Instructions page 2

Sanyo lcd projector lens replacement amd installation procedures

Hide thumbs Also See for LNS-S03:

NOTES ON LENS INSTALLATION

• Lens installation and replacement should be made by the qualified service per-

sonnel.

• Be sure to install the lens following this procedure precisely.

• The lens cover is on the lens for protection. Be sure to replace the lens cover

before installation.

• When installing or replacing the lens, be careful not to stain, scratch or damage

the lens.

LIST OF CONTENTS

Following parts are included in the packing.

• LENS

• DRIVER

BE SURE TO CHECK FOR SAFETY

After installing or replacing the lens, be sure to check the following for safety.

1. Check the lens is securely fixed by 4 screws.

2. Check no part is missing, or no mounting part is loose.

Some parts are not used for installation or replacement. Keep these parts for later use.

Note : Figures in this manual may be differ from the actual product.

1 pc.

-1-