Wenshing RD232-H-RS485-434M Instruction Manual page 14

Bit7: 0~8-bit format (8,1,N/7,1,O/7,1,E/7,2,N)
1~9-bit format (8,1,O/8,1,E/8,1,S/8,2,N(8,1,M)
Note: N/O/E/M/S mean No check(None), Odd parity check(Odd), Even
parity check(Even), 1 check(Mark), 0 check(Space)
Bit6~5: 00 No check/Mark check
01 Odd parity check
10 Even parity check
11 Space check
Bit4~3: Fixed to 0
Bit2~0: Interface rate
Value 0
Rate(bps) 1200
 3
rd th
& 4 Byte: Group (GID), set up range 0000~FFFF
 5
th
Byte: Instrument ID(SID), set up range 00~FF
 6
th
Byte: Wrong parameter, fixed as 0x00
 7
th
Byte: Transmit rate, set up range 00~07; Normally, the RF transmit rate
must greater than interface speed rate when setting up, it prevents having the
wrong information.
Value
Rate(bps) 1600
 8
th th
to 10 Byte: Working frequency, calculation:
MHz*1000=KHz, and transfer to 16 Bytes.
For example: When it is at 434MHz working frequency，
434*1000=434000=0x06 9F 50 fill in 06 in the 8
Byte, fill in 50 in the 10
When it is at 432.5MHz working frequency, 432.5*1000=432500=0x06 99
74; fill in 06 in the 8
 The 11
th
Byte:
Bit0～Bit2: Shooting rate, set up range 0~7
http://www.wenshing.com.tw; http://www.rf.net.tw
1 2
2400 4800
0 1 2
3200 6400
th
Byte.
th
Byte, fill in 99 in the 9
Output Power
dBm Set Value
5
12
17
3 4
9600 19.2K 38.4K
3 4
12.8K 25.6K 51.2K 76.8K 128K
th
th
Byte, fill in 74 in the 10
Hex (Bit0～Bit2)
0
1
2
RD232-H Instruction Manual P.14
5 6
57.6K 115.2K
5 6
Byte, fill in 9F in the 9
th
000
001
010
7
7
th
Byte.