Insert RD232-H-USB into Computer B's USB hub
file and find the "Test" file
"sscom32.exe"
Open the software, choose your "ComNum" (serial number, "COM3" for example),
then choose "9600" for your baud rate
to complete Computer B's setup.
http://www.wenshing.com.tw; http://www.rf.net.tw
. In the "Test" file, find and double click on
.
B.PC
. Open the software's
RD232-H-USB
, and then click on "Open Com"
RD232-H Instruction Manual P.11