Using The Commander - Sony RM-SC200 Operating Instructions Manual

Using the Commander

The Commander allows you to control most
of your components' functions.
The button functions at any
time
UNIT OFF TV OFF SYSTEM OFF
TV VCR1 VCR2 DBS/CATV
TUNER CD MD TAPE
MUTING VOL JUMP/ CH
SHIFT
Turning on the components
Press the function button for each
component.
Note on VCR 1 and VCR 2 button
Press the VCR 1 or VCR 2 button. The
component turns on. When you press the ",
or MENU/PROG button, the receiver input
switches to the component and the
component picture appears on the TV.
The function buttons except for the VCR 1
and VCR 2 button turn on each component
and switch the receiver input to the
components respectively.
When you turn on a cable box
When the power of the cable box is off, you
cannot power on the cable box with the
Commander. Make sure that the power of
the cable box is always on.
Turning off the entire system
Press the SYSTEM OFF button.
Turning off the components
TV
Press the TV OFF button.
Other component
1 Press the UNIT OFF button.
UNIT OFF
The "UNIT" indication appears and
"OFF" appears.
SYSTEM OFF
2 Press the function button for each
component within five seconds.
Note
Function
Hold down the UNIT OFF button and press
buttons
the desired function button; the respective
component will be on/off according to its
Volume control
current on/off mode.
buttons
Continued
9
RM-SC200.3-858-330-11.E