DIGISYNTHETIC K7 Product Use Manual page 9

GUI software installation guide
1.Put into the disk of accessories, open the CD-ROM and launch
the application"Setup.exe" for installation.
2. The installation window appears, click the Next to continue.
3. Software will ask you to choose the installation path, and then
click next to continue.
4. Follow the wizard until the installation is complete.
5. Please confirm that computer and device have been properly
connected.Launch the GUI application, click Button "Online" in
the menu,and select"USB" or "COM" to connect the device,
which depends on how you actually connected the interface.
GUI software Notes
All the panel buttons and the knobs cannot be controlled when the
device is connected to the GUI.
No need to select which one serial port, software can
automatically search.
USB driver free.
GUI software can set all the parameters of the device.
Please refer to the help documentation for the GUI software
operation instructions.
Necessary online control tips:
Before the user is online control operation, be sure to read the
following notes in detail:
Otherwise it will increase the risk of abnormal conditions such as
offline, computer damage, and so on when you are online:
1.In order to ensure the normal operation of the device, please
firstly check AC power if in the range of the device.
2.If conditions permit, AC power outlet needs to have the
grounding connection settings. And use a grounding power
connected to the computer and the device.
3.The same model and the same version of GUI software don't
repeatedly install.
4. All of the GUI software don't install in the same directory.
5. To avoid the use in strong interference and strong magnetic
field environment.
6.The following acts may lead to the failure of online control, and
even damage the device or your computer:
1) Before the implementation of online, Please do not plug in or
pull out the line connected the device after it is turned on.
2) After the success of online, please do not move the computer,
device and control line.
3) After the success of online, please do not operate by panel;
including touching any keys on the device.
4) After the success of online, please do not go to plug the device
or personal computer online connector.
5) After the success of online, please do not open the same type
of online control software in the computer.
6) After the success of online, please do not use a computer to
control many different device.
7. Please refer the important security matters content from the
manual.
Available online computer
Available online interface
Accessories
Description
RS232C Cable
USB Cable
Product software CD
Product us age guide (This document )
Rem ote
Ground
ACPower Grounding
Quantity
1
1
1
1
1
7