Using As A Card Reader; For Windows Vista/Xp/7 Users - Sanyo XACTI VPC-GH3EX Instruction Manual

USING AS A CARD READER

CAUTION
For VPC-GH3EX
i It is not possible to copy files from the computer side (a hard disk, etc.) to
the camera's internal memory or installed card.

For Windows Vista/XP/7 users

Mounting your camera
1
Set the camera to the card reader mode (page 143).
h The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
2
Select an action.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1
Left-click on the icon for safely removing hardware in the task tray.
h A list appears showing the devices connected to the computer's USB
connector.
2
Left-click on the camera drive.
3
Click on the [OK] button.
h The camera can now be disconnected.
146
English