Sanyo Xacti VPC-CA8GX Instruction Manual page 110

HINT
If the motion compensation does not seem to be working...
i Due to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
i If the digital zoom (page 66) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
i When using a tripod or other means to stabilize the camera during
shooting, please turn the motion compensation function off ]. If the
motion compensation function is enabled when it is not actually needed, it
may result in an image that appears unnatural.
When motion compensation is enabled,
i The following icons are shown on the monitor:
TV-SHQ
Setting Movie stabilizer Photo stabilizer
00:04:30
Icon
display
Can't set the photo stabilizer setting?
i The photo stabilizer is automatically turned off after any of the following
operations:
h Setting the flash mode to forced flash
h Setting the shooting mode to the sequential shots mode
h Setting flicker reduction (page 139) to "ON"
h Setting the scene select function to the night view portrait, fireworks, or
lamp mode
The photo stabilizer isn't working?
i The photo stabilizer does not work when you are capturing a still image
while recording a video clip.
i The photo stabilizer does not work when the ISO sensitivity is set to -.
Limitations when the photo stabilizer is "ON"
i The time it takes for the camera to save an image may be slightly longer
when the photo stabilizer is set to "ON".
Movie field of
view display
Photo field of
view display
Movie stabilizer
+
Photo stabilizer
92
English