Table of Contents
Advertisement
16 Getting Started
Using the AEB (Auto Exposure Bracketing) Function
When using the AEB (Auto Exposure Bracketing) function, the camera automatically takes
3 consecutive photos with different exposures by pressing the Shutter button once. For example, when
the current EV compensation value is 0 EV and the AEB bracket interval value is set to ±0.3, the camera
takes shots of the same scene with 3 varying levels of exposure: -0.3 EV, 0 EV and +0.3 EV.
This function is only available in Auto, P-Mode and Macro modes. To set the AEB mode:
1. Press the MENU button to display menu options.
2. Press the Left/Right navigation buttons to select AEB setting.
3. Press the Up/Down navigation buttons to select from the
available options:
•AEB:
Select to enable (ON) or disable (OFF) the AEB
function.
•BRACKET: Select to set the bracket interval value ranging
from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.
•EXIT:
Select to apply new settings to the camera and
return to the SETUP menu.
Note:
1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.
2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.
Taking your First Photo
AEB
ON
BRACKET
± 0.3EV
EXIT
AEB
Hide quick links:
Advertisement
Table of Contents
