Time Menu - Sharp LC-60UI9362K Operating Instructions Manual

TIME MENU

Any time related function
can be set or seen here.
When the time is selected using the [UP/DOWN] arrow buttons and [OK] is pressed, the following options
appear:
TIme:
Auto Sync
Time Zone
Daylight Savings
On Time
Off Time
Sleep Timer
Auto standby
OSD Timer
26
Turn on to synchronise the time to the incoming digital television signal. If
connected to the internet, the clock will be updated from here. Turn off to
set the clock manually.
Adjustment of the time offset. Use the [UP/DOWN] arrow buttons on the
remote control to change the setting.
Cannot be set in Freeview mode as this information is taken from the
Freeview transmission. Allows 1 hour offset from GMT.
Allows you to set a specifi c time for your TV to turn on, the channel it will
then display, the source it will be on and also the volume. This function can
then be toggled to repeat every day or a certain day. If your set is in standby
and the on time is reached, it will turn on.
On time Allows you to set a specifi c time for your TV to turn on. Use
arrow buttons to select the option and [OK] to set.
Input Source Select the source which the television should turn on and
display.
Digital Channel Type Only applicable for DTV. TV, Radio or Data can be selected.
Channel Use the [RIGHT/LEFT] arrow buttons to select number.
Volume Sets volume which the set comes on at.
Allows you to set a specifi c time for your TV to turn off. Use arrow buttons
to select the option and [OK] to set.
Lets you set the sleep timer so the television automatically switches off after
a set amount of time. Options are; Off, 15min, 30min, 45min, 60min, 90min,
120min or 240min.
Controls the amount of time the set will continue to operate without any
buttons being pressed on the set or remote control before going into
standby. Options are OFF, 3 hours, 4 hours or 5 hours.
Lets you adjust the amount of time the on-screen Menu stays on before
disappearing. Option are; Never, 10S, 20S, 30S or 60S. (S = Seconds.)
TV Menu Operation