Completing The First-Time Setup Menu - Sharp AQUOS User Manual

ENGLISH FRANÇAIS

Completing the First-Time Setup Menu

Press the [ ]] button on the remote to turn on the TV.
After the splash screen that displays the SHARP logo appears, begin the first-time setup menu.
Screen Task
1. Using the D-pad arrows of your remote, choose your Language, Country and Time Zone.
Language and
Location
2. Navigate to the Forward arrow and press [OK].
1. Press [OK] on your remote to select Decline, Agree or Confirm.
End User License
Agreement
2. When you're done, then navigate to the Forward arrow and press [OK].
Select Home Mode(which appears by default) and then navigate to the Forward arrow to press
[OK].
TV Usage
NOTE
• Store Mode should only be selected by Retailers who plan to demonstrate the TV.
If your TV does not automatically detect an Ethernet connection, then use a wireless network,
Network
select your network from the list that displays, also you can add a hidden network. When you're
Connection
done, move to the next screen.
Select how you receive your TV channels. Choose from one of the following sources below.
• HDMI
• ANT/CABLE
• AV
Select your
Primary input
• COMPONENT
source
• NONE
NOTE
• If you use an antenna to receive channels, then you must complete the first-time setup
menu in order to run a channel scan.
ESPAÑOL
13