5. Tighten the gland nut. Use the dedicated tool for fastening the sealing
glands.
Connect the Ethernet Cable to Computers
1.
After connecting the Ethernet cable to the unit, install a protective
cover on the connector at the other end of the Ethernet cable.
2.
Connect the Ethernet cable to the port on the PoE adapter labeled
PWR+DATA OUT.
3.
Connect another Ethernet cable to the port on the PoE adapter
labeled DATA IN and the RJ-45 port on a PC/Notebook
PC/Hub/Swtch.
4.
Connect the PoE adapter to a power source via the power
adapter/power cable.
11
Installation